Duke EW-2-DLSS | demo1.restaurantcloseouts.com

Description

The Duke EW-2-DLSS is an electric hot food serving counter designed for efficiency and durability. Featuring a 32"W x 34"D x 36"H footprint, this unit is constructed with a robust 16-gauge stainless steel top and a 20-gauge stainless steel body, ensuring long-lasting performance. It includes two stainless steel sealed wells that maintain optimal food temperatures without the need for water, enhancing safety and convenience. Equipped with user-friendly touch screen controls, the Duke EW-2-DLSS allows for easy operation and precise temperature management. The integral stainless steel cutting board provides a practical workspace, while the dish shelf offers additional storage for serving essentials. The unit stands on 6"H stainless steel legs with adjustable feet, ensuring stability on various surfaces. This model is cULus and UL EPH CLASSIFIED, meeting high standards for safety and performance. Ideal for commercial kitchens and catering services, the Duke EW-2-DLSS combines functionality with a sleek design.

14ga stainless steel top, in lieu of standard +$136.80

4" to 6" riser (backsplash) on rear +$211.50 Recess top to hold 18" x 26" pans, NOTE: not available with model #HTD-BASE-M heat in base option +$860.40

800 & 900 Series 400 Series 500 Series

Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$613.80 Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (specify any special height) +$330.30 Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top (specify any special height) +$582.30 Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$775.80 Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (2) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$492.30 Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (2) hinged brackets, shelf mounted flush to counter top +$744.30

Kick Plate, customer's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$201.60 Kick Plate, customer's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$201.60

Kick Plate, operator's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$201.60 Kick Plate, operator's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$201.60

Move cord set to operator's left +$84.60 Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$164.70 Bumpers (3" x 3" rubber corners) (per set) +$139.50 Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$66.60 Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$66.60 Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$66.60 Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$165.60 Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$513.90 Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$158.40 Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$250.20 Omission of shelves, open base +$738.00 Special height legs (per leg) (shorter height voids NSF approval) +$63.90 Special Height Body, per unit For special width body…per unit +$323.10 Body latches for holding portable units together, pair +$126.00 Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$323.10 Pedestal-type duplex outlet, mounted, not wired +$361.80 Pedestal-type duplex outlet, mounted, wired to existing power source +$492.30 Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$673.20 Modified base - to accept roll warmer (warmer by other manufacturers) not wired...per roll warmer +$593.10 For special length not listed (maximum one-piece length of 88"): To next longer standard unit price...ADD (for TST models) +$323.10 For pass-thru construction +$323.10

Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$344.70 Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$388.80

Veneer plastic laminate on body (NOTE: Manufacturer's standard colors ONLY, metallics, color-core & raised textures may incur additional cost)

Single door, no lock, left hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$576.00 Single door, with lock & keys, left hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$649.80 Single door, no lock, right hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$576.00 Single door, with lock & keys, right hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$649.80

120 volt, 1 phase, 1330 watts, 11.1 amps 208 volt, 1 phase, 1000 watts, 4.8 amps 240 volt, 1 phase, 1330 watts, 5.5 amps

Brand	Duke
Certifications	cULus
Width (in)	320
Height (in)	360
Depth (in)	340
Weight	320