Duke TST-18SS | demo1.restaurantcloseouts.com

Description

The Duke TST-18SS is a mobile utility serving counter designed for versatility and durability. Featuring a solid 16-gauge stainless steel top, it provides a robust surface for food preparation and service. The 20-gauge stainless steel body and undershelves ensure strength and longevity, making it ideal for busy kitchen environments. Equipped with 5-inch diameter gray poly swivel casters and brakes, this unit offers easy mobility and stability when needed. NSF certified, the Duke TST-18SS meets strict health and safety standards, making it a reliable choice for any food service operation. Dimensions are 18"W x 32"D x 36"H.

4" to 6" riser (backsplash) on rear +$141.30 For recessed top (to accommodate griddles, fryers, etc.): To standard unit price...ADD (for TST models) +$860.40 Extend width of top up to 12", for a 44" or less overall top, with stainless steel fixed brackets +$91.80 14ga stainless steel top, in lieu of standard +$91.80 Internal Locking Device (on both ends), stainless steel pin & latch line up device under countertop, per unit price (Note: Units required to be portable) +$194.40

Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$313.20 Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$355.50

Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$313.20 Tray Slide, operator's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$355.50

Veneer plastic laminate on body (NOTE: Manufacturer's standard colors ONLY, metallics, color-core & raised textures may incur additional cost)

Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$164.70 Bumpers (3" x 3" rubber corners) (per set) +$139.50 Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$66.60 Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$66.60 Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$66.60 Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$165.60 Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$513.90 Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$158.40 Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$250.20 Omission of shelves, open base +$738.00 Special Height Body, per unit For special width body…per unit +$323.10 Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$323.10 L-shaped counters - inside or outside corner formed by lapping standard units +$495.90 Pedestal-type duplex outlet, mounted, not wired +$361.80 Pedestal-type duplex outlet, mounted, wired to existing power source +$492.30 Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$673.20 For special length not listed (maximum one-piece length of 88"): To next longer standard unit price...ADD (for TST models) +$323.10 For pass-thru construction +$323.10

Kick Plate, customer's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$134.10 Kick Plate, customer's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$134.10 Kick Plate, operator's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$134.10 Kick Plate, operator's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$134.10

Single door, no lock, left hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$576.00 Single door, with lock & keys, left hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$649.80 Single door, no lock, right hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$576.00 Single door, with lock & keys, right hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$649.80

Additional Information

Brand	Duke
Certifications	NSF
Width (in)	180
Height (in)	360
Depth (in)	320
Weight	180